USB-FP0, USB-AFC8513 Plc Programming CableUSB-AFP8513 is through the USB interface is provided with a serial connection and RS232 signal cable programming, in computer operation of driver under control, the USB interface into a computer simulation of the traditional serial port (known as COM ports), and use of existing programming software, communication software and monitoring software application software. This cable work power from USB, no longer by PLC programming mouth power supply, conversion box of leds instructions to send and receive data and power states state.USB-AFP8513 programming cable applies to the FP0 matsushita electric, FPX FP2, FPe and FP-M series PLC and GT01, GT30, GT11 series touch screenFeatures and technical index:"Support USB-AFP8513 operating system: WIN7 / Windows/Windows XP (WinNT4/95/98 / Me/DOS does not support)"Support USB-AFP8513 programming software version: FPSOFT V1.1 and above"Fully compatible USB V1.1 and USB V2.0 norms"USB bus power supply and consume the current about 50 mA"Baud rate: 300 BPS ~ 1 Mbps standard baud rate to be automatic adapt"Support UART data format: data bits: 7, 8, and stop bits: 1, 2, parity: odd/even/no parity"Every PC support more USB cable root programming"Working temperature: 75 ~ + 20"The cable length: 3 m Method of use:​USB-AFP8513 programming cable need to install the USB device driver to use, the drivers are included in the release of the products with the disk, installation method see driver disc of video demo on the document.The driver installation is completed, the Windows of the device manager will come USB-AFP8513 programming cable corresponding COM port, just in programming software or other software applications can choose the COM port, and other communications parameters using the default Settings, the use of the next with the traditional RS232 interface programming cable completely the same.